Give a source a ready chain of steps with Start From, keep your own with Save as Preset…, and use a step's own presets.
Set up a source in one click, from Live Producer’s presets or one of your own. See Processing.
Before you start
Section titled “Before you start”- Open the show and Window › Audio Routing (⌥⌘A).
Step 1: Choose Start From
Section titled “Step 1: Choose Start From”Open the source’s Add Step menu (the + on its processing half). Under Start From, choose a preset: Lav Mic, Handheld Mic, Room Mic, Remote Guest or one of yours. Hold the pointer over a preset to see its steps. The menu bar has the same under Audio › Start From for the selected source.
The preset replaces the source’s steps, as one undo. With a venue in use, As at with the venue’s name comes first for a source whose steps the venue kept.
Step 2: Adjust a step
Section titled “Step 2: Adjust a step”Click a step’s row to open its window. Its Preset menu in the toolbar has the step’s own presets; Default puts every setting back. The menu says Custom once you change a setting.
| Step | Its presets |
|---|---|
| Clean Voice | Default, Lav Mic, Noisy Room |
| Equalizer | Default, Voice Clarity, Warm, Telephone |
| Compressor | Default, Gentle, Voice, Firm |
| Room Reduction | Default, Light, Strong |
Step 3: Save your own
Section titled “Step 3: Save your own”When a source sounds right, choose Save as Preset… in its Add Step menu (or Audio › Save as Preset…). Type a name and click Save. A name already in use is replaced: the button says Replace. Your presets are listed under Start From after Live Producer’s.
To remove one, choose Delete Preset in the same menu.
Verify
Section titled “Verify”- The source’s processing half lists the preset’s steps.
- Your preset appears under Start From on every source and in other shows.
Related
Section titled “Related”Describes Live Producer 0.330 · 10 November 2026