Give the room's speakers and the in-ears the sources as they come, without the processing's delay.
In the room, the presenter’s voice and the PA are heard together. A PA that plays the processed sound comes 30 ms or more late, which sounds like an echo. Give it the sources before processing. See Processing.
Before you start
Section titled “Before you start”- Connect the PA or the in-ear system to this Mac.
- Open Window › Audio Routing (⌥⌘A).
Step 1: Add a bus for the room
Section titled “Step 1: Add a bus for the room”Click Add Bus in the toolbar. Choose Chosen Sources for the microphones only, or Everything on Program, Minus… for the whole show. See Buses.
Step 2: Hear the sources before processing
Section titled “Step 2: Hear the sources before processing”Open the bus’s … menu and tick Hears the Sources Before Processing. The card says Before processing.
Step 3: Play it to the PA
Section titled “Step 3: Play it to the PA”Drag from the bus’s port to the PA’s device, or tick the device under Outputs in the bus’s … menu. See Route a bus.
Verify
Section titled “Verify”- The status line under the columns adds that the bus hears the sources before the processing.
- In the room, the voice from the PA no longer sounds doubled.
Related
Section titled “Related”Describes Live Producer 0.330 · 10 November 2026